Sumitomo Z2C - Fiber Holder Operation

7-4
7. Other convenient functions｜Fiber holder operation
7. Other convenient functions
❚
Fiber holder operation
You can use fiber holders for single fiber to splice fibers by removing the
coating clamp. Sumitomo FHS series fiber holders are applicable.
1: Loosen the coating clamp fixing screw
to remove the coating clamp.
Coating clamp
2: There is a holder stage under the
coating clamp. A fiber holder can be
placed on the holder stage.
Fiber holder
FHS-025
Holder stage
Coating clamp fixing screw