7-3
7. Other convenient functions｜Fiber holder operation
7. Other convenient functions
<For fiber cord & round drop cable >
Fiber cord sheath
φ0.9m
Bare fiber
5mm
10mm
Diameter of fiber coating Cleave length φ0.9mm coating length
3.5 mm or less 10mm 5mm
Recommended lengths
<For loose buffer coating>
φ0.9mm loose buffer
φ0.25mm
Bare fiber
10mm
10mm
Diameter of fiber coating Cleave length φ0.9mm coating length
900μm loose buffer 10mm 10mm
Recommended lengths
When fitting the coating clamp to the fusion splicer, do not overtighten
the screw.
Doing so can cause the splicer to be damaged.
(Recommended torque: 18cN・m)
Caution
To Next Page
Loading...
