Sumitomo Z2C - Copying Heater Program (Administrator Mode)

5-4
5. Heater program｜Copying heater program (in Administrator mode)
5. Heater program
4: Select the program you want
to copy and tap Done
(
).
Next, select where you want to
paste the copied program and
tap Done ( ).
1: On the “Heater Program
screen” (▸P.2-10), Select the
sleeve type where you
would like to change the
settings.
In Administrator mode, you can create your own new heater program by copying
an existing heater program to a blank area of heater programs. After the copy,
you can edit the name of the copied program and change the parameter settings.
First, log in to Administrator mode to do this action.
(▸P.8-1 Logging in to and logging out of Administrator mode）
2: Tap the Pencil icon ( ) at
the right upper corner of the
screen.
3: Tap ( ). A pull-down menu
appears. Select Copy
( ) from the pull-down
menu that appears.
5: You can edit the name of the
copied program and change
the parameter settings.
❚
Copying heater program (in Administrator mode)
An editable parameter has a
> mark ( ) at the right-
most
p
art of the row.
▸P.5-3 Customizing heater program
Heater Pro
g
ram edit screen