Note:
In cases where a EOBD Device is connected to the analyser, rpm
and oil temperature data will be obtained via the OBD device.
- CO corrigé (COc) may be displayed using a formula corrected for
fuel type.
3.2
Maintenance
Details of the maintenance operations that should be carried out by the
operator are included in this manual together with a list of operator
service messages and a list of maintenance parts.
All maintenance operations, other than those specifically described in
this manual, must be carried out by trained service personnel authorised
by the manufacturer.
In particular, full gas calibrations must only be performed by a qualified
representative of the manufacturer.
3.3
Options
Can differ depending on market, please refer to your Sales group for a
list of options if applicable to your market.
8
To Next Page
Loading...