5.6
Print
Figure 5-8 The “Notes” Dialog Box 1
Note:
The DGA 5000 uses the same “Print” procedure to provide a printout of
all gas analyser test results. The following description is, therefore,
applicable irrespective of whether the Free Measurement or Country
Specific test procedure is employed.
•
Open the “Notes” dialog box:
-
By pressing the “Print” toolbar icon button, or
-
By pressing the “Print” text button in the The Print Preview
Window (Free Measurement procedure only (see 8.5)).
The “Notes” dialog box will be displayed. The vehicle identification
information headings, entered via the “Printout Footer” box of the The
General System Setup Screen (see the Diagnostic Platform
Operator‟s Manual 5.2: „The General System Setup Screen‟), will be
shown in the left-hand text box.
•
Enter the vehicle identification information for the test vehicle in the
right-hand text box, opposite the appropriate heading.
Figure 5-9 The “Notes” Dialog Box 2
•
Press “OK” to make a printout of the test results.
24
To Next Page
Loading...