•
Press “Back” or the “Gas Analyser” toolbar icon button to return to the
Gas Analyser Menu.
5.3
Gas Analyser Maintenance Menu Options
Figure 5-5 The Gas Analyser Maintenance Menu
The Maintenance procedures that can be initiated from the Gas
Analyser Maintenance Menu are:
-
Leak Check (Vacuum) (see 10.2). (item 1)
-
Leak Check (Gas) (see 10.3). (item 2)
-
Gas Calibration Check (see 10.4). (item 3)
-
Check and/or Install the O2 Cell (see 10.5). (item 4)
-
Diagnostics/Gas Calibration (item 5 &6) are restricted to Service
Engineers only.
•
To initiate a Leak Check (Vacuum), select the “Leak Check (Vacuum)
option.
•
To initiate Leak Check (Gas), select the Leak Check (Gas) option.
•
To initiate a Gas Calibration Check, select the Gas Calibration Check
Option.
20
GAS ANALYSER MAINTENANCE MENU
To Next Page
Loading...