8.4
Editing Limit Sets
Figure 8-6 The Edit Limit Sets Window
To alter any or all of the limit values currently shown in the Vehicle Setup
Screen:
•
Press the “Edit Limit Set” button corresponding to the Limit Set to be
edited.
The Edit Limit Set Window will be displayed.
•
Use the keyboard to make the required alterations.
To alter a limit value:
•
Select the value to be altered using the “Tab” key.
The selected field will be highlighted in Blue.
•
Use the “Backspace” key to delete the current value.
•
Enter the required new value.
•
Repeat the procedure for all values that are to be altered.
•
If required, repeat the procedure to edit the other limit set.
•
To apply the new values, click “OK” or press the “Enter” key.
The new values will be applied and the window will be closed.
•
To cancel the alterations and return to the Vehicle Setup Screen, click
“Cancel” or press the “Esc” key.
The window will be closed and the current limit values will continue to
be applied.
46
To Next Page
Loading...