•
To manually initiate an Zero-calibration, press the “Zero-calibration”
button (see 6.2.4).
•
To toggle between limit sets, press the “Toggle Limit Sets” button (see
8.6: „Storing Data in the Data Buffers‟).
•
To freeze the current readings, press the “Freeze” button (see
8.6: „Storing Data in the Data Buffers‟).
•
To store the current readings, press the “Store” button.
The “store” button is only available after the “Freeze” button has
been pressed (see 8.6: „Storing Data in the Data Buffers‟).
•
To unfreeze the frozen readings, press the “Unfreeze” button.
The unfreeze button is only available after the “Freeze” button has
been pressed (see 8.6: „Storing Data in the Data Buffers‟).
•
To return to the Gas Analyser Menu, press the “Gas Analyser”
toolbar button.
8.1.1
Engine Speed Measurement Setup
Figure 8-2 Engine Speed Setup screen
The Engine Speed Setup screen (Figure 8-2) opens automatically when
Free Measurement is selected from the Gas Analyser Main menu and
“8520” has been selected as the RPM and Oil Temperature
measurement device in the General settings screen.
41
To Next Page
Loading...