5.2
The Gas Analyser Maintenance Menu
Figure 5-4 The Gas Analyser Maintenance Menu
•
To access the Gas Analyser Maintenance Menu , select the
“Petrol” option from the Gas Analyser Menu (see 5.1 , 5.3).
The Gas Analyser Maintenance Menu allows access to:
-
The Gas Analyser Operator Maintenance Procedures.
-
The Gas Analyser System Settings Screen.
-
The Gas Analyser System Information Screen.
•
To following Maintenance procedures can be initiated from
this menu:
-
leak, gas calibration checks and O2 sensor checks
-
Diagnostics & Calibration procedures (Service
Technician level only)
Refer to 5.3 for a description of the Maintenance features and to
Chapter Maintenance‟ for details of the available maintenance
procedures.
•
To access the Gas Analyser System Settings Screen, select the
“System Settings” option.
The System Settings Screen allows settings to be made affecting the
operation of the gas Analyser. Refer to 5.4 for further information.
•
To reveal the Gas Analyser System Information window, select the
“System Information” option.
The System Information Pop-up Window provides details of gas
calibration dates, software versions etc. Refer to 5.5 for further
information.
19
To Next Page
Loading...