•
Press “Store” to store the Limit Set 2 data or “Undo” to unfreeze the
data and return to continuous measurement.
Figure 8-11 Store Limit Set 2 Readings
The number “2” will appear alongside the number “1” in the toolbar
indicating that data is now stored in both buffers.
Limit Set 1 will be automatically applied for the next set of
measurements and will be shown by the “Toggle Limit Sets” button.
The “Freeze” button will be automatically selected.
Figure 8-12 Limit Set 1 and 2 Readings Stored
•
Press the “Print preview” button to review the stored data
8.7
The Print Preview Window
Figure 8-13 The Print Preview Window
50
To Next Page
Loading...