Sun Microsystems DGA 5000 - Page 21

Table 4-1 Gas Analyser Toolbar Icons
Icon
Name
Description
Standby
Use this button to place the unit in standby
mode.
Zero-
calibration
Use this button to manually initiate a zero-
calibration (see 6.2.4: „Zero-calibration‟).
Toggle Limits 1
Indicates that limit set 1 is currently applied; click
to toggle to limit set 2; (see 8.2: „Free
Measurement Vehicle Setup‟ and 8.5: „Free
Measurement Test Procedure‟).
Toggle Limits 2
Indicates that limit set 2 is currently applied: click
to toggle to limit set 1; (see 8.2: „Free
Measurement Vehicle Setup‟ and 8.5: „Free
Measurement Test Procedure‟).
Table 4-2 Gas Analyser Menu Icons
Icon
Name
Description
Free
Measurement
Selects the Free Measurement Program (see
8.5: „Free Measurement Test Procedure‟)
Gas Analyser
System Setup
Selects the The Gas Analyser System Menu
12
GAS ANALYSER ICONS