Figure 9-11 Warm-up
Figure 9-12 Zero Calibration
Figure 9-13 HC Residue Check
Each of the above statuses is represented by its own automatically
displayed pop-up window, showing the status concerned together with a
countdown of the time remaining in that status.
The windows can either be closed manually to allow access to the
screen buttons or will close automatically when the system moves
into another status. In the event of a pop-up window being
automatically closed, it will remain hidden when moving between
menu or setup screens but will reappear if a different mode (e.g. leak
check, system information display etc.) is selected.
67
To Next Page
Loading...