19-2 Netra Internet Server 3.1 User’s Manual—September 1996
19
Audio Volume
Use the Audio module to adjust the volume for configuration messages and
audio files that are played through the Netra system speaker.
You can test the volume level by playing a sample sound when you set the
level.
▼ To Adjust the Audio Volume
1. Select System Administration: Audio.
The Audio Administration page, showing the current volume, is displayed.
2. Set the volume using Table 19-1.
Table 19-1 Information for Audio Administration
Audio Volume An integer between 0 and 99, inclusive, where
0 = no sound
99 = maximum volume
Output Port The destination of the audio output. Select built-in speaker,
headphone jack, or line out.
Play Sample Sound Plays a sound at the selected volume on the Netra system
speaker. Choices: Yes, No
To Next Page
Loading...
