Netra System Administration 19-19
19
User Accounts
The User Accounts module allows you to add new user accounts, or change or
delete existing accounts.
When you create a user account, you allocate storage space on the Netra server
for that user. The user can also receive mail on the Netra server. A user account
can be accessed using standard protocols, such as rsh, telnet, rlogin, and
FTP.
Note – You cannot use this module to administer the root user or setup user
accounts.
If no users are defined, you will only see the Add A User option. The Modify
or Delete options are only displayed after you add at least one user account.
When you remove a user account, the data in that account is deleted.
User Account Procedures
▼ To Add a User Account
1. Select System Administration: User Accounts ➤ Add A User.
The Add A User page is displayed.
2. Enter the information in the form using Table 19-14.
Table 19-14 Information for User Accounts
User Name The login name of the user you want to add/modify. The name
must be unique. Example: Jerry.
Initial Password (Optional) The password the user will need when logging in to
the Netra server for the first time. The user will be required to
provide and verify a new password as part of the initial log in.
If you do not set an initial password, then the user is not
prompted for it during initial log in.
To Next Page
Loading...
