Netra System Administration 19-15
19
▼ To Remove Packages, or Patches
Note – Sometimes packages may not be removed in the correct order. If this
happens, re-select the packages that failed, and remove them.
1. Select System Administration: Software Management.
The Software Management Administration page is displayed.
2. Select Remove: Packages or Remove: Patches.
3. Enter the information in the form using Table 19-10.
4. Restart the Netra server using System Administration: Restart and
Shutdown.
▼ To View Installed Packages, or Patches
• To view installed packages, select System Administration: Software
Management ➤ View: Installed Packages.
• To view installed patches, select System Administration: Software
Management ➤ View: Installed Patches.
Table 19-10 Information for Removing Packages/Patches
Remove All Patches Removes all patches on the Netra server.
Remove Selected
Packages/Patches
Removes only the packages or patches you specify from the
list. If you select this option, you must also select at least one
package/patch; if you select any packages/patches, you
must also select this option.
•You cannot remove all installed packages.
To Next Page
Loading...
