Sun Microsystems Netra - LAN Emulation Interface

9-6 Netra Internet Server 3.1 User’s Manual—September 1996
9
▼ To Modify or Unconfigure a Classical IP Interface
1. Select Network Connection Administration: ATM.
The ATM Administration page is displayed with configuration information
for each port.
2. Select one of the following.
• To modify a Classical IP interface, select Modify for the required interface,
and make the changes in the form using Table 9-3.
• To unconfigure a Classical IP interface, select Unconfigure for the interface
you want to remove; then confirm the operation.
3. Restart the Netra server using System Administration: Restart and
Shutdown.
LAN Emulation Interface
▼ To Configure a LAN Emulation Interface
1. Select Network Connection Administration: ATM.
The ATM Administration page is displayed with configuration information
for each port.
2. Select Configure a LAN Emulation interface
An administration page for the selected interface is displayed.
3. Enter the information in the form using Table 9-4.
4. Restart the Netra server using System Administration: Restart and
Shutdown.
Table 9-4 Information for ATM LAN Emulation Interface
LAN Name The name of an emulation LAN to join.
Host Address The host address for the network interface. This address
should be unique on the system.
Netmask The netmask address that determines the network with
which the host address is associated.
Example: 255.255.255.0