Netra System Administration 19-7
19
▼ To Change the Restore Device
1. Select System Administration: File System Backup and Restore.
The File System Backup and Restore Administration page is displayed.
2. Select Restore: Change Restore Device.
The Change Restore Device page is displayed.
3. Select the tape drive you want to use to restore the file system
(see Table 19-3).
▼ To Restore Groups of Directories
Note – Before you begin, make sure the tape is in the drive.
1. Select System Administration: File System Backup and Restore.
2. Select Restore: Easy Restore.
The Easy File System Restore page is displayed.
3. Make the selections in the form using Table 19-4.
Table 19-3 Information for Restore Device
Restore Device The tape drive that contains the backup tape that will be used to
restore the file system. If an attached tape drive does not appear on
the displayed list, restart the server with the Check for new devices
during restart option in the
Restart and Shutdown module.
Table 19-4 Information for Easy Restore
Directories The directories that will be restored from the backup tape to the Netra
server. You must select at least one directory. Choices: Mail
(/export/mail), HTML documents (/export/htdocs), Anonymous
FTP (/export/ftp), Users’ homes (/export/home).
Eject Tape Ejects the tape from the drive after the restore operation is completed.
Choices: Yes, No.
To Next Page
Loading...
