19-18 Netra Internet Server 3.1 User’s Manual—September 1996
19
Unconfigure
Use the Unconfigure module to unconfigure Netra administration modules.
Once you unconfigure a module, you return it to its factory settings. You may
have to perform an initial configuration after unconfiguring certain modules.
For example, if you unconfigure the Administration Web Server module, the
administration password reverts to its factory setting. Browser reauthentication
may be necessary.
▼ To Unconfigure Modules
1. Select System Administration: Unconfigure.
The Unconfigure page is displayed.
2. Enter the information in the form using Table 19-13.
Table 19-13 Information for Unconfiguring Modules
Unconfigure all modules Unconfigures all modules that have configuration
information.
Unconfigure selected modules Unconfigures only the modules you select from the
list. If you select this option, you must also select at
least one module; if you select any modules, you
must also select this option.
To Next Page
Loading...
