Netra System Administration 19-5
19
Restore Options
When a directory is restored, all files and directories in that directory are
copied from the backup tape to the Netra file system. For example, if you
restore the Users’ homes directory, all files in all users’ directories are copied
to the file system.
The following restore options are available:
• Change restore device: A default tape drive is displayed as the device that
contains the backup tape from which a file system is restored. This option
allows you to specify a different tape drive, if necessary.
• Easy restore: Allows you to restore selected directories from the backup
tape that is in the current restore device. You can restore any of the
following directories: Mail, HTML documents, Anonymous FTP, and
Users’ homes.
• Selective restore: Allows you to restore only the directories you need from a
backup tape.
Backup and Restore Procedures
▼ To Set Backup Options
1. Select System Administration: File System Backup and Restore.
The File System Backup and Restore Administration page is displayed.
2. Select Backup: Set Backup Options.
The File System Backup Options page is displayed.
3. Enter the information in the form using Table 19-2.
Table 19-2 Information for Backup Options
File System Backup Backs up the file system as specified in the following fields in
this table. Choices: Enable, Disable.
Backup Device The tape drive that will be used for the backup procedure. If an
attached tape drive does not appear on the displayed list,
restart the server with the Check for new devices during restart
option in the Restart and Shutdown module.
Eject Tape Ejects the tape from the drive after the backup is completed.
Choices: Yes or No.
To Next Page
Loading...
