Sun Microsystems Netra - Installing Solstice Backup 4.2.2 and Solstice Disksuite 4.0 Software

B-1
Installing Solstice Backup 4.2.2 and
Solstice DiskSuite 4.0 Software
B
This appendix describes how to install the Solstice DiskSuite and Solstice
Backup software.
The 3.0.1 version of the Netra Internet Server: Recovery CD-ROM contains two
new network storage management products: Solstice Backup 4.2.2 and Solstice
DiskSuite 4.0.
To install either product, use the Software Management module of the Netra
administration framework. To use these products, you must have a monitor for
your Netra server and run the software in the OpenWindows environment.
(You cannot administer this software using the Netra HTML-based user
interface.) User documentation is provided in the online AnswerBook™ for
each product.
Installation for both Solstice Backup 4.2.2 and Solstice DiskSuite 4.0 consists of
the same overall tasks: install the required software packages; install the
required patches; restart the Netra server; access the online documentation for
further information. A detailed description follows.