A-2 Netra Internet Server 3.1 User’s Manual—September 1996
A
▼ To Install Localized Software During Initial Configuration
♦ Perform the tasks described in Chapter 4, “Performing the Initial
Configuration.”
▼ To Install Localized Software on a Configured Netra Server
1. Insert the localization CD-ROM in the Netra CD-ROM drive.
2. From the Netra Main Administration page, select System Administration:
Software Management ➤ Select new installation medium.
3. Select CD-ROM as the installation medium.
4. Select Install: Clusters.
The Installing Clusters page is displayed with a pair of clusters (required
and optional) for each locale. For example, the localized software for Japan
is contained in the Required Japanese Netra Software and Optional
Japanese Netra Software clusters.
5. Select the two clusters for your locale.
You must install the Required cluster. The Optional cluster is necessary
only if you have installed additional Solaris software.
6. Once you install the locale-specific clusters, return to the Netra Main
Administration page.
7. Select System Administration: System Defaults.
The System Defaults Administration page is displayed.
8. Select a new default system locale from the scrolling list.
9. Restart the Netra server using System Administration: Restart and
Shutdown.
▼ To Perform a Crash Recovery on a Localized Netra Server
1. See Chapter 20, “Netra System Recovery,” for system recovery options.
2. Perform the recovery using the instructions in Chapter 20.
3. Reinstall the localized Netra software using the instructions in this
chapter.
To Next Page
Loading...
