ATM Administration 9-7
9
▼ To Modify or Unconfigure a LAN Emulation Interface
1. Select Network Connection Administration: ATM.
The ATM Administration page, with configuration information for each port
is displayed.
2. Select one of the following.
• To modify a LAN emulation interface, select Modify for the required
interface, and make the changes in the form using Table 9-4.
• To unconfigure a LAN emulation interface, select Unconfigure for the
interface you want to remove; then confirm the operation.
3. Restart the Netra server using System Administration: Restart and
Shutdown.
To Next Page
Loading...
