20-4 Netra Internet Server 3.1 User’s Manual—September 1996
20
7. Now select one of the following steps:
• If only the user data partition required repairs, and you repaired it
successfully, or if you decided not to continue with the displayed options,
restart your Netra server now.
• If you reinstalled the Netra server and you have a Netra reconfiguration
diskette, insert the diskette in the drive and restart the system. Once the
Netra server has been configured, proceed to Step 8.
• If you reinstalled the Netra server and you do not have a Netra
reconfiguration diskette, restart the system and perform the initial
configuration as described in Chapter 4, “Performing the Initial
Configuration.”
8. Reinstall any additional software that was previously installed on the
Netra server.
To Next Page
Loading...
