Installing Solstice Backup 4.2.2 and Solstice DiskSuite 4.0 Software B-3
B
4. Once you have installed the required packages and patches for each
product, restart the Netra server using the Restart and Shutdown module.
5. Open a Shell Tool or Command Tool, and, as root, access the online
AnswerBook documentation as follows:
This command brings up the AnswerBook Navigator. You can access the
required documentation for further information on how to use the Solstice
Backup and Solstice DiskSuite software.
Note – If you install the Solstice Backup 4.2 software, do not use the File
System Backup and Restore module simultaneously. If you install the Solstice
DiskSuite 4.0 software, do not use the External Disks module to administer the
same disks.
# /usr/openwin/bin/answerbook
To Next Page
Loading...
