C-8 Netra Internet Server 3.1 User’s Manual—September 1996
C
▼ To Complete Other Configuration Tasks
1. Use the displayed modules to perform any further system configuration
tasks (such as setting up mail aliases, configuring a name service, or
setting routing options).
Refer to the relevant chapters in this manual for more information on each
administration module.
2. Once the Netra server is completely configured, save the configuration
information as follows:
a. Insert a blank diskette into the Netra disk drive.
If you do not have a diskette drive on your Netra server, proceed to
Step b.
b. Select System Administration: Save and Restore Configuration.
c. If you are saving your configuration to diskette, select Save
configuration to diskette.
If not, select Save configuration to file system.
To Next Page
Loading...
