5-2 Netra Internet Server 3.1 User’s Manual—September 1996
5
Place all files that can be accessed from the server in the /export/ftp/pub
directory. Anonymous FTP users will see this directory as /pub. If the server is
configured with upload capability, anonymous users will be able to copy files
to the /export/ftp/incoming directory. FTP users will see this directory as
/incoming.
The Anonymous FTP administration module displays the current
configuration state of your Netra server. If you want to change this state, use
the radio buttons to select one of the other two configuration options.
▼ To Configure Anonymous FTP
1. Select Network Services Administration: Anonymous FTP.
The Anonymous FTP Administration page, with the current state of the
server, is displayed.
2. Enter the information in the form using Table 5-1.
Table 5-1 Information for Anonymous FTP
Enable anonymous FTP
with upload and
download capability
Anyone can connect to the Netra server using FTP.
A user can copy files from the /export/ftp/pub
directory on the Netra server to the user machine and
from the user machine to the /export/ftp/incoming
directory on the Netra server.
•Files for download should be placed in the
/export/ftp/pub directory by the root user.
Enable anonymous FTP
with upload capability
only
Anyone can connect to the Netra server using FTP.
A user can only copy files from the /export/ftp/pub
directory on the Netra server to the user machine.
•Files for download should be placed in the
/export/ftp/pub directory by the root user.
Disable anonymous FTP Only users with valid user accounts on the Netra server
can connect to it using FTP.
To Next Page
Loading...
