Drive Cleaning Tasks
96116 • Revision: KA Chapter 3 SL500 Automated Library Operations 113
▼ Clean a Drive Manually
Your library could contain more than one type of drive. So, before initiating a clean job,
make sure that the system cells have the appropriate cleaning cartridges for the drives
being cleaned. Generate a cartridge summary and drive details report to verify the
cleaning cartridges present in the library.
Note – To display a list of cleaning cartridges, see “Display Cleaning Cartridges” on
page 111.
Note – You can initiate a manual clean even if the “drive needs cleaning” status is
“false.”
1. Select Tools > Diagnostics.
2. Expand the Drive Folder.
3. Select the drive that requires cleaning and then select the Clean tab.
4. Click the Start Clean button in the Options Bar.
To Next Page
Loading...
Need help?
General
