CAP Operation Tasks
190 SL500 User’s Guide • July 2008 Revision: KA • 96116
▼ Eject Cartridges From a Partitioned Library
Use this procedure to eject cartridges from a partitioned library. Partitions with no
allocated CAP cells must use common CAP cells. Partitions with allocated CAP cells
must use the cells allocated to them.
Note – This procedure highlights aspects of CAP operations that are unique to
partitioned libraries. For general enter and eject procedures, see “Chapter 3, Library
Operation.”
1. Initiate the eject operation at the host. See the appropriate tape management
software documentation for the procedures and commands.
2. The HandBot places the cartridges into CAP cells accessible to the host.
3. Select Tools > Diagnostics.
4. Expand the CAP Folder, and click the CAP you want to use.
Note – In a partitioned library, only one CAP is listed in the Diagnostics CAP Folder.
The Import/Export screen appears.
To Next Page
Loading...
Need help?
General
