Partition Summary Screens
96116 • Revision: KA Chapter 6 Library Partitioning 209
Partitions—Summary (Step 2)—Modify Partition
Sample Screen
Description
Allows you to modify the name or barcode format of the selected partition.
This screen is a popup that appears when you click Modify Partition on the
Partitions—Summary (Step 2) screen.
Caution – Information in the SL Console partition workspace is saved to the library
controller database only through the Commit (Step 4) screen. If your SL Console
session ends or you refresh the workspace data before you have committed your
updates through the Commit (Step 4) screen, you will lose any partition changes you
have made through the Summary (Step 2) and Design (Step 3) screens and all
associated popups.
Screen Fields
Modify Partition n
Display only.
ID of the partition you want to modify.
Name
Name you want to assign to the partition.
0–60 ASCII characters.
The screen displays the value assigned previously. You can leave it as is or make
changes.
Barcode Presentation
Tape cartridge bar code format to be used for the partition.
To Next Page
Loading...
Need help?
General
