Partition CAP Operation Screens
96116 • Revision: KA Chapter 6 Library Partitioning 245
Diagnostics > CAP—Assign CAP Button
Sample Screen
Description
Allows you to select the partitions to which you want to assign the CAP Open button
on the library control panel. After using this screen, the following actions occur when
you press the CAP Open button:
â– The library opens the doors of all CAPs containing cells accessible to the partitions
selected on this screen.
â– The library sends CAP status messages to all hosts with access to the exposed cells.
â– Doors to CAPs that contain only inaccessible cells do not open.
â– Doors to CAPs with cartridges in inaccessible cells do not open.
Note – Depending on how your library’s CAPs are configured, this operation may
expose CAP cells that are not accessible to the requesting host’s partition.
To Next Page
Loading...
Need help?
General
