40 Sun Fire X4150, X4250 and X4450 Servers Windows Operating System Installation Guide • January 2009
14. Follow the on-screen instructions to complete the initial setup of Windows
Server 2003 until you are prompted with the following message:
Remove disks or other media. Press any key to restart.
When this message appears you will need to complete one of the following steps,
depending on which driver delivery method you have chosen, to complete the
installation:
■ Floppy Disk Local: Remove the floppy disk from the floppy drive on the
server.
■ Floppy Disk Remote: Remove the floppy disk from the JavaRConsole server.
■ Floppy Image: Deselect Floppy Image from the JavaRConsole Devices menu.
Then, press any key to restart the system and complete the Windows Server 2003
Installation.
15. Proceed to Chapter 8 “Updating the Critical Server-Specific Drivers.”
To Next Page
Loading...
