52 Sun Fire X4150, X4250 and X4450 Servers Windows Operating System Installation Guide • January 2009
3. Double-click on the .exe executable file to start the installation process.
Follow the on-screen instructions to install the chipset drivers. When done,
proceed to the next step.
4. Using Windows explorer, navigate to the Ethernet drivers:
cdromdrive:\drivers\windows\IntelNIC
â– Double-click on the .exe file and follow the on-screen instructions to install
the ethernet drivers. When done, proceed to Step 5.
–or–
â– Install the drivers using the Windows Device Manager, as follows:
a. Open the Device Manager.
b. Right-click on the NIC with the yellow bang (!) and choose Update.
c. Select No, not at this time, and click Next.
d. Select Install from a List or Specific Location, and click Next.
e. Click Browse, and point to the NIC driver on the CD/DVD path:
d:\drivers\windows\IntelNIC\2003\2003_version
Where version is the version of Windows, 32-bit/64-bit.
Note – To utilize the additional features of the Intel Proset software, such as NIC
teaming, fault tolerance, load balancing, etc., refer to the section “Additional
Information for Supplemental Software” on page 56 after you have completed
updating the critical server drivers and installing supplemental software.
5. Using Windows explorer, navigate to the TPM drivers:
cdromdrive:\drivers\windows\tpm
a. Extract the .zip file.
b. Double-click on the executable.
Follow the installation wizard to install TPM drivers. When done, proceed to
the next step.
6. Using Windows explorer, navigate to the AST2000 display drivers:
cdromdrive:\drivers\windows\display\version
Where version is the version of Windows: 2003 32-bit/64-bit, or 2008 32-bit/64-bit.
a. Open the Windows Device Manager.
b. Right-click the display driver, and choose Update.
To Next Page