Chapter 8 Update the Critical Server-Specific Drivers 53
c. The Hardware Update Wizard appears.
d. Select No, not at this time, and click Next.
e. In the dialog box that follows, select Install from a list or specific location
and click Next.
f. Click Browse and navigate to the following directory on the Tools and
Drivers CD/DVD:
cdromdrive:\drivers\windows\display\version
Where version is the version of Windows: 2003 32-bit/64-bit, or 2008 32-bit/64-
bit.
g. Click OK, and then click Next.
The AST2000 driver is installed.
7. For Windows Server 2003 SP1 installations, use Windows explorer to navigate
to the IPMI driver:
cdromdrive:\utilities\ipmitool\Windows\version
Where version is the version of Windows Server 2003 SP1: 32-bit or 64-bit.
a. Double-click the ipmievd-version.exe executable to install the IPMI
Management Driver.
Where version is the version number for the software.
b. Double-click the ipmitool-version.exe executable to install the IPMItool.
Note – Additional setup may be required to use the IPMItool. Refer to “Completing
the IPMItool Installation” on page 61 for additional instructions.
8. Reboot the server.
9. Proceed to “Installing Supplemental Software” on page 54.
To Next Page
Loading...
