User Manual 9 System Decommissioning
63
9.2 Dismantling the Inverter
Risk of burn injuries and electric shock!
Do not touch any inner live parts until at least 10 minutes after
disconnecting the inverter from the utility grid and the PV input.
1. Refer to “5 Electrical Connection” for the inverter disconnection of all
cables in reverse steps.
2. Dismantle the inverter referring to “4 Mechanical Mounting” in reverse
steps.
3. If necessary, remove the wall-mounting bracket from the wall.
4. If the inverter will be reinstalled in the future, please refer to “3
Unpacking and Storage” for a proper conservation.
9.3 Disposing of the Inverter
Users take the responsibility for the disposal of the inverter.
Some parts and devices of the inverter, such as the capacitors, may
cause environment pollution.
Do not dispose of the product together with household waste but in
accordance with the disposal regulations for electronic waste
applicable at the installation site.
To Next Page
Loading...
