Sungrow SG8K-D - Safety during Mounting; Location Requirements

15
4 Mechanical Mounting
4.1 Safety during Mounting
Make sure there is no electrical connection before installation.
In order to avoid electric shock or other injury,
be sure there is no
electricity or plumbing installations before drilling holes.
Risk of injury due to improper handling
 The weight can cause injuries, serious wounds, or bruise.
 Always follow the instructions when moving
and positioning the
inverter.
System performance loss due to bad ventilation!

The inverter requires good ventilation during operation. Keep it
upright and nothing covering the heat sink.
Wear gloves to avoid scratches when mounting the inverter.
4.2 Location Requirements
The inverter with IP65 can be installed indoors or outdoors.
Selecting an optimal location for the inverter is critical for its operating safety as
well as the expected efficiency and service life. Considerations for the location
include:
1. The structure should be capable of withstanding a force of four times the
weight of the inverter and be suitable for the dimensions of the inverter.
2. Install the inverter where it is convenient for installation, cable connection
and service.