Sungrow SG8K-D - Energy Meter (Optional)

User Manual 2 Product Introduction
7
Tab. 2-2 Dimensions and Weight
Type
W (mm)
H (mm)
D (mm)
Weight (kg)
SG2K-S / SG2K5-S /
SG3K-S
300 370 125 8.5
SG3K-D / SG5K-D
360
390
133
11.5
SG8K-D
360
390
148
15.5
LCD Panel
The LCD panel with a screen, an indicator and two buttons is on the front of the
inverter.
31 2 2
Fig. 2-4 LCD Panel
No.
Name
Description
1
LCD
screen
Display and access current operating data or change inverter
settings.
2
Buttons
ESC / ENT.
View or set parameters
via the buttons. For detailed
functions, see Tab. 6-1.
3
Indicator
Green / red.
User can observe the colour and blinking frequency to get
the current state of the inverter. For detailed definition, see
Tab. 6-2.
2.3 Energy Meter (optional)
The SUNGROW Energy Meter is installed next to the main switch to detect the
electrical measured values at the grid-connected point. It communicates with
the inverter via an RS485 connection. The dimensions are shown below.