5
12) HEIGHT OF SUB FEED DOG-------------------------------------------------------------------------- 21
13) HEIGHT OF NEEDLE------------------------------------------------------------------------------------ 22
14) LOEWR LOOPER ADJUSTMENT-------------------------------------------------------------------- 22
15) UPPER LOOPER ADJUSTMENT --------------------------------------------------------------------- 23
16) NEEDLE GUIDANCE ADJUSTMENT--------------------------------------------------------------- 24
17) DOUBLE CHAIN STITCH NEEDLE GUIDANCE ADJUSTMENT--------------------------- 25
18) PRESSER FOOT INSTALLATION-------------------------------------------------------------------- 26
19) PRESSER FOOT ARM LEFT/RIGHT ADJUSTMENT ------------------------------------------- 26
20) PRESSER FOOT LIFTING LEVER ADJUSTMENT ---------------------------------------------- 26
21) PRESSER FOOT LIFTING ADJUSTMENT--------------------------------------------------------- 27
22) PRESSER FOOT STOPPER ADJUSTMENT-------------------------------------------------------- 27
23) DOUBLE CHAIN STITCH LOOPER OF SC9300 SERIES ADJUSTMENT ----------------- 28
24) QUANTITY OF SUPPLIED THREAD ADJUSTMENT ------------------------------------------ 29
25) UPPER BLADE CHANGE ------------------------------------------------------------------------------ 30
26) LOWER BLADE CHANGE----------------------------------------------------------------------------- 30
27) OVEREDGE WIDTH ADJUSTMENT---------------------------------------------------------------- 30
28) HEMMING WIDTH ADJUSTMENT ----------------------------------------------------------------- 31
29) ADJUSTING UPPER FEED DOGS (SCT SERIES) ------------------------------------------------ 31
30) ADJUSTING OF UP/DOWN POSITION AND OPERATING RANGE ----------------------- 32
31) PRESSURE FOOT CHANGE--------------------------------------------------------------------------- 34
32) PRESSURE FOOT POSITION ADJUSTMENT----------------------------------------------------- 34
33) LEFT/RIGHT POSITION OF THE UPPER FEED DOG ADJUSTMENT --------------------- 35
34)
ADJUSTING THE LIFT TIMING OF THE UPPER FEED DOG AND PRESSURE FOOT
----------- 35
35)
ADJUSTING OF THE LIFTING QUANTITY BETWEEN THE PRESSURE FOOT AND THE UPPER FEED DOG
----- 36
36) CLEANING SEWING MACHINE -------------------------------------------------------------------- 37
To Next Page
Loading...
Need help?
General
