LUBRICATION AND MAINTENANCE
Publication: 0028607 6-3
6
2. If the first screen is ignored, after a period of time a
REGEN Required Now warning message will be
displayed. At this time the operator must cease all
work operations, put the truck into road mode, and
perform a regen cycle.
Figure 6-4
3. If a regen cycle is not performed after the first two
messages are displayed, a REGEN OR Engine
Stops message will be displayed. This is the
operator’s final opportunity to perform a regen cycle
before the engine stops.
Figure 6-5
4. If all three regen messages are ignored, a STOP
ENGINE Now message will be displayed. The
operator will no longer be able to perform a regen
cycle, and functions of the truck become limited. The
engine must be turned off to prevent damage, and
the truck will need to be serviced by a dealer before it
can be restarted.
Figure 6-6
To Next Page
Loading...