EasyManua.ls Logo

Super Products Camel 1200 (Ejector Unloading) - DEF Maintenance; Exhaust Aftertreatment Regeneration Information

Super Products Camel 1200 (Ejector Unloading)
158 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6-2 Publication: 0028607
LUBRICATION AND MAINTENANCE
6
DEF Maintenance
The cab and chassis supplied with your Camel™ sewer
cleaner is equipped with a diesel exhaust after-treatment
system that must be maintained properly to ensure
proper operation of the truck.
Always make sure the diesel exhaust fluid (DEF) tank (1)
has adequate DEF fluid. The truck’s emissions system is
constantly consuming this fluid to perform the exhaust
aftertreatment.
NOTE
The DEF tank may be located in different locations
on the truck depending on the specific cab and
chassis configuration.
Figure 6-2
Exhaust Aftertreatment Regeneration
Information
When the truck needs to go into a regen cycle, a series of
alarms and warning messages will be displayed on the
front control panel HMI screen to instruct the operator to
shut down work operations and put the truck into a regen
cycle.
NOTE
For specific regen instructions and DEF
specifications, see the owner’s manual supplied with
the OEM chassis.
1. The first screen that will be displayed will be a
REGEN Required Soon message to alert the
operator to start shutting down work operations, put
the truck into road mode, and perform a regen cycle.
Figure 6-3
1
ok

Table of Contents