1-6 Publication: 0028607
SAFETY
1
GENERAL HAZARDS AND PREVENTION SAFETY — CONTINUED
Figure 1-5
Visibility Conditions When Operating
• Operate in daylight or with lights that gives at least
50 yards clear visibility.
• Be able to see and identify passersby, steep slopes,
ditches, drop-offs, overhead obstructions, power
lines, debris, and foreign objects.
• Use extreme care when backing up. Vision may be
limited. Severe damage or injury can occur.
• Do not run engines in enclosed building without
adequate exhaust ventilation.
Mounting and Dismounting Truck or
Equipment
• Only mount or dismount when truck and moving
parts are stopped.
• Always use three-point contact when climbing on
or dismounting equipment.
• Walkways, steps, and handrails should be checked
before use to ensure a proper non-slip surface.
Replace or repair damaged component immediately.
Hot Surface
• Stay clear of hot surfaces such as mufflers, hydraulic
pumps, valves, and tanks.
• Relieve pressure from tank, reservoirs, valves, and
hoses before servicing or opening.
Safety Signs
• Replace missing, damaged, or unreadable safety
signs immediately!
Equipment Guards
• Never operate machine if equipment guards are
damaged or missing.
• Replace missing or damaged guards immediately!
To Next Page
Loading...