EasyManua.ls Logo

Super Products Camel 1200 (Ejector Unloading) - Decal Location

Super Products Camel 1200 (Ejector Unloading)
158 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY
Publication: 0028607 1-35
1
DECAL LOCATION
In addition to the decals provided by Super Products™
there may be decals shown that are part of the cab and
chassis or other non Super Products components; these
will not be covered.
Some decals shown may appear in a different location
than pictured due to differences in optional equipment on
each machine and differences in cab and chassis
configuration.
If any decal provided by Super Products is missing or
becomes illegible, a replacement decal can be requested
from Super Products at no charge and should be
replaced immediately.
Figure 1-32: Inside Cab
ITEM DESCRIPTION TYPE PART NO. SEE FIG.
1 Parameters and software INSTRUCTION 0003392 1-39
2 Automatic trans program content NOTICE 3050-00260 1-40
3 Avoid unexpected vehicle movement DANGER 0007457 1-41
4 Vehicle height CAUTION 0026566 1-42
Not shown
Contact info (under driver’s side sun visor) INSTRUCTION 3050-00193 1-43
2
4
3
1

Table of Contents