Page
12
3. Set Water Days: Key in a day of the week that watering is to occur and then
press the Water Day key. Repeat for all selected watering days.
EXAMPLE: Selected watering days are Sunday, Monday, and Wednesday. To
program, press:
To delete a programmed Water Day, key in that day and press Skip Day key.
When programming a Water Day, display will show “On” and the number cor-
responding to the appropriate day of the week (Sun. = 1, Mon. = 2, Tues. = 3,
etc.). To indicate a Skip Day, display will show “Of" and the day number.
Note: To Schedule watering to occur on other than specific days of the week,
such as every other day, every 3
rd
day, every 4
th
day, etc., refer to instructions on
page 21.
4. Set Station Water Time: To set the watering duration of each station to be
included in program:
a. Key in station number.
b. Press Stn. Water Time key.
c. Key in watering duration.
d. Press Enter key.
e. Repeat for all stations to be included in this program.
EXAMPLE A: Station 4 to water for 24 minutes, press:
EXAMPLE B: Station 12 to water for 1 hour 40 minutes, press:
To change the watering duration of a station, follow steps a thru d above enter-
ing the new duration at step c. To delete a programmed station, enter “0” at step
c.
Controller will skip unprogrammed stations.
WATER
DAY
1
SUN
2
MON
WATER
DAY
4
WED
WATER
DAY
4
WED
STN
WATER
TIME
2
MON
4
WED
ENTER
2
MON
1
SUN
STN
WATER
TIME
1
SUN
4
WED
0
ENTER
To Next Page
Loading...
Need help?
General