Page
21
EXAMPLE A: The new watering duration of each station in Program 1 to be
75% of programmed settings. Turn dial to Program 1, then press:
EXAMPLE B: The new watering duration of each station in Program 2 to be
150% (50% increase) of programmed settings. Turn dial to Program 2, then press:
Note: Station water times may be returned to their original value by following
steps 1 to 4 above, entering 100 at step 3.
Note: Watering times displayed take into account water budget percentage ad-
justments.
Changing The Length Of The Watering Calendar
For greater flexibility, the watering calendar may be changed from its factory set-
ting of 7 days to any other length from 1 to 32 days. This change affects all pro-
grams.
The calendar setting is the number the controller counts to, advancing one num-
ber each day, before resetting to 1. Watering occurs on all days set as water days.
To simplify programming, you may wish to shorten the calendar A 2 day calen-
dar, for example, will permit watering to occur every day (with days 1 and 2 both
set as water days) or every other day (with either day 1 or day 2 set as a water
day).
A longer calendar may also be programmed. For skip day programming, a 12 day
calendar allows watering to be scheduled at any of the following intervals: every
day, every 2
nd
day, every 3
rd
day, every 4
th
day, every 6
th
day, or every 12
th
day.
PM
%
1
SUN
5
THU
0
ENTER
PM
%
7
SAT
5
THU
ENTER
To Next Page
Loading...
Need help?
General