Page
15
Advancing To Another Station During A Watering Cycle
To advance to another station, first turn dial to program in operation:
a. Key in station to which advancement is desired.
b. Press Manual On/Off key.
c. Return dial to Auto position.
Terminating a Watering Cycle
Turn dial to program in operation and press Manual On/Off key Return dial to
Auto position.
Manually Turning A Station On And Off
To turn station on:
a. Turn dial to Manual position.
b. Key in station number
c. Press Manual On/Off key.
To turn station off, do one of the following:
a. Press Manual On/Off key; OR
b. Move dial out of Manual position; OR
c. Select another station for manual operation.
Note: A station turned on manually will automatically shut off at midnight.
Beep Alert: While a station is on manually, the controller will sound two short
beeps every 30 seconds.
Manually Turning Master Valve Pump Start Station
On and Off
To turn on the master valve/pump start station without other stations
turning on:
a. Turn dial to Manual position.
b. Key in 0.
c. Press Manual On/Off key.
To turn off master valve/pump start station, press Manual On/Off key, or move
dial out of Manual position.
To Next Page
Loading...
Need help?
General