SUPERIOR CONTROLS STERLING CONTROLLERS User Manual

Page
18
PROGRAMMING WATER TIMES OF
CONSECUTIVE STATIONS USING ONE
ENTRY
This feature is a short-cut method for programming station water time of con-
secutive stations with the same watering duration. This procedure replaces step
4 of Basic Programming Instructions. With dial at desired program:
a. Key in number 99.
b. Press Stn. Water Time key. (“b” will appear on display.)
c. Key in number of the first station in the series.
d. Press Enter. (“E” will appear on display.)
e. Key in the number of the last station in the series.
f. Press Enter. (“D” will appear on display.)
g. Key in watering duration.
h. Press Enter. The number entered for watering duration will flash to indi-
cate that the entry has been accepted.
EXAMPLE: Stations 4 through 12 are each to water for 8 minutes in
Program 2. With the dial in Program 2 position, press:
4
WED
STN
WATER
TIME
99
ENTER
1
SUN
2
MON
ENTER
8
ENTER

SUPERIOR CONTROLS STERLING CONTROLLERS Specifications

General

Brand	SUPERIOR CONTROLS
Model	STERLING CONTROLLERS
Category	Controller
Language	English