Page
29
MISTING APPLICATIONS
Designed with the greenhouse grower in mind, the Sterling is a highly flexible
misting controller in addition to being an ideal controller for virtually all other
irrigation applications. The following instructions are for misting applications
only. For other watering applications, follow the instructions beginning on page
11.
Programming Features Include:
• Individual station timing adjustable from 1 second to 24 minutes in 1
second increments.
• “OFF” time between misting cycles adjustable from 1 minute to 255
minutes in 1 minute increments.
• Cycling can be scheduled to begin and end automatically (built-in 24-hour
clock)
• Cycling can be started and stopped manually as well as automatically.
• Period of time each day that cycling will occur is adjustable from 1 minute
to 23 hours 59 minutes
• Six independent programs that can run concurrently.
• Programmable pause of 1 second to 59 seconds between stations to allow
full valve closure before advancement to the next station.
• No limit on the number of programs to which a station can be assigned.
PROGRAMMING INSTRUCTIONS FOR
MISTING APPLICATIONS
If you make a mistake while programming, the controller displays an error mes-
To Next Page
Loading...
Need help?
General