SuperMax TV - Timer

User manual [English]
21
 The “GMT Offset” item is valid only when the
setting of “GMT Usage” is “Yes”. You can
press [Volume Up / Volume Down] keys to
switch “GMT Offset” value, and the range is
“-12:00 ~ +12:00”, increase each half hour
progressively.
 You can press [Left/Right] to control Summer
time on or off.
 “Date” and “Time” items are valid only when
the setting of “GMT Usage” is “No”. You can
press [Volume Up / Volume Down] keys to
moving highlight and use number keys to
input directly.
If the current channel provides the correct
time information, you will see the current time
while you enter “Time” menu. If the channel
doesn’t provide time information, you have to
input the date and time information manually.
 Time Display can control time display on or off
when full screen play.
 Press [Menu]key to draw back from “Time”
menu.
9.4 Timer
Press [enter] key to open timer menu.
 Current time information will display on the first
column; if the current time is incorrect, please
modify the time information in “Local Time
Setting” item.
 Timer Number: You can press [Volume Up /
Volume Down] keys to set Timer number, and
there are 8 timers in total.
 Timer Mode: There are several modes for
Timer to setting, include Off, Once, Daily,
Weekly, Monthly and Yearly.
 Timer Service: There are two options for “Timer
Service”, include “TV Channel”, “Radio
Channel” (timer setting for channel change and
Wakeup/Sleep)"Record Radio", "Record TV"
(Timer setting for Record the TV or Radio
program to USB Hard Disk) and Message
(reminding message).
 When you select “Channel” (timer setting for
channel change and Wakeup/Sleep) option in
“Timer Service”, the screen will display like
below:
¾ Channel: press [OK] key to enter
channel list and select channel that
you want to setting.
¾ Date: use number keys to input your
wakeup date.
¾ On Time: use number keys to input your
wakeup time. Once the time’s up, no
matter what the system is in standby
mode or in playing mode, the system will
automatically switch to the channel you
want and start to play.
¾ Duration: After you set a time for
“Duration” item, once the time’s up, the
system will automatically switch to
standby mode. If you want not work this
function, set the duration is 00:00.
¾ Record Type: You can select record file
type among TS and PS.
 When you select “Message” (reminding
message) option in “Timer Service”, the
screen will display like below: