3-6
C7Q67 User's Manual
Battery Holder
1
2
Battery Installation
To install an onboard battery, follow the steps 1& 2 above and continue 1.
below:
Identify the battery's polarity. The positive (+) side should be facing up.2.
Insert the battery into the battery holder and push it down until you hear a 3.
click to ensure that the battery is securely locked.
Warning: When replacing a battery, be sure to only replace it with the
same type.
This side up
Press down until
you hear a click.
3-5 Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required
before any warranty service will be rendered. You can obtain service by calling
your vendor for a Returned Merchandise Authorization (RMA) number. For faster
service, you may also obtain RMA authorizations online (http://www.supermicro.
com/support/rma/). When you return the motherboard to the manufacturer, the
RMA number should be prominently displayed on the outside of the shipping
carton, and mailed prepaid or hand-carried. Shipping and handling charges will
be applied for all orders that must be mailed when service is complete.
This warranty only covers normal consumer use and does not cover damages
incurred in shipping or from failure due to the alteration, misuse, abuse or improper
maintenance of products.
During the warranty period, contact your distributor rst for any product prob-
lems.
To Next Page
Loading...
Need help?
General
