Supero C7Q67 - External SATA Port; Hot Plug; PCI Latency Timer; Pcie;Pci;Pnp Configuration

Chapter 4: AMI BIOS
4-11
SATA Port0~Port5
This item displays the information detected on the installed SATA drives
on the particular SATA port.
Staggered Spin Up
Set this item to Enabled to enable Staggered Spin-up support. The
options are Enabled and Disabled.
External SATA Port
Set this item to Enabled to enable eSATA support. The options are
Enabled and Disabled.
Hot Plug
Set this item to Enabled to enable hot-plugging. The options are
Enabled and Disabled.
RAID Mode
The following items are displayed when RAID Mode is selected:
SATA Port0~Port5
This item displays the information detected on the installed SATA drives
on the particular SATA port.
Hot Plug
Set this item to Enabled to enable hot-plugging. The options are
Enabled and Disabled.

PCIe/PCI/PnPConguration
This feature allows the user to set the PCI/PnP congurations for the following
items:
PCI Latency Timer
This feature sets the latency Timer of each PCI device installed on a PCI bus. Select
64 to set the PCI latency to 64 PCI clock cycles. The options are 32, 64, 96, 128,
160, 192, 224 and 248.
SR-IOV Support
Single Root I/O Virtualization (SR-IOV) is a specication that allows a PCIe device
to appear as multiple physical devices to the system. The options are Disabled
and Enabled.