4-10
C7Q67 User's Manual
OnBoardChipConguration
This item displays the current South Bridge Revision.
USB 3.0 Legacy Support
Select Enabled to enable the USB 3.0 ports to support legacy devices.
The settings are Enabled and Disabled.
XHCI Hand-off
Select Enabled for Operating Systems without XHCI hand-off support. The
XHCI ownership change will be claimed by the XHCI driver. The settings
are Enabled and Disabled.
IDE/SATAConguration
When this submenu is selected, the AMI BIOS automatically detects the presence
of the IDE Devices and displays the following items:
SATA Mode
This item selects the mode for the installed drives. The options are Disabled, IDE
Mode, AHCI Mode and RAID Mode.
IDE Mode
The following items are displayed when IDE Mode is selected:
Serial-ATA Controller 0~1
This feature is used to activate/deactivate the SATA controller, and sets
the compatibility mode. The options are Enhanced and Compatible. The
default of Serial-ATA Controller 1 is Enhanced.
SATA Port0~Port5
This item displays the information detected on the installed SATA drives
on the particular SATA port.
AHCI Mode
The following items are displayed when AHCI Mode is selected:
Aggressive Link Power Management
This feature Enables or Disables Agressive Link Power Management
support for Cougar Point B0 stepping and later. The options are Enabled
and Disabled.
To Next Page
Loading...
Need help?
General
